Hawk Scraper Floor-Prep Driver

Use the Hawk Scraper to remove tile adhesives, carpet backing, industrial grease & soil, and coatings from hard surfaces. 13”, 17”, and 20” sizes. The Scraper drives six 1”x1” carbide steel blades, each on a dual-position rigid mount. Drive the Scraper with a Hawk Severe Duty Floor Machine with a 1.5 HP motor.

Engineered Design
•  Two sizes – 13″ and 20″.  The 20″ Scraper fits 17″ and 20″

     machines
•  3/8” thick steel plate construction. The plate is e-coated for

    corrosion resistance.
•  The plate is fit with six (6) tungsten steel cutter holders mounted

     with easily removed, allen head screws
•  Each cutter holder carries one (1) 1” x 1” carbide cutting blade.

    Each blade has 8 cutting edges.
•  Mount the blade for a wide cutting edge, or a sharp cutting point
• The Hawk Scraper mounts on the floor machine with a custom

    milled aluminum clutch plate on a riser (included).
•  The aluminum clutch plate won’t seize onto gear drive hub
•  Add the optional dust ring and vacuum mounting kits on your

    Hawk floor machine for handling dusty soils
•  Add optional machine weights on your Hawk floor machine for

    greater down pressure and faster scraping results

 • Order replacement cutter blades #HPA0033RC – set of 3

Safety Tips
•  20” Scraper is built with mounting grip recess for
safer mounting

• Always unplug the floor machine before mounting or removing

   the Scraper
• Always wear gloves when handling sharp cutting edge tools